Configuring Cisco MDS 9000 Switches
Volg de Configuring Cisco MDS 9000 Switches training. Deze training Cisco MDS 9000 Series Switches configureren laat je zien hoe je Cisco MDS 9000 Series Switches implementeert, beheert en problemen oplost om zeer beschikbare, schaalbare opslagnetwerken te bouwen.
Na afronding van deze training kun je onder andere:
Training: Configuring Cisco MDS 9000 Switches
This Configuring Cisco MDS 9000 Series Switches course shows you how to implement, manage and troubleshoot Cisco MDS 9000 Series Switches, to build highly available, scalable storage networks. You will learn how to deploy and use capabilities such as virtual storage area networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, Fibre Channel over TCP/IP (FCIP) tunnels and more. You will learn how to configure and implement platform features and learn troubleshooting techniques pertaining to Fibre Channel (FC) domains, firmware upgrades, zones and zone mergers.
This course prepares you for Cisco CCNP Data Center and Cisco Certified Specialist – Data Center SAN Implementation certifications.
After completing this course you should be able to:
- Discover and describe the Cisco Multilayer Director Switch (MDS) platform of multilayer switches and directors. Describe the MDS hardware, NX-OS operating system, Data Center Network Manager (DCNM) management software and key architectures of the platform, such as FC and Fibre Channel over Ethernet (FCoE)
- Describe key product features of the MDS platform, including VSANs, RBAC, NPV, port channels, zoning, device aliases, Interactive Voice Response (IVR) and fabric security
- Describe and implement state-of-the-art product features
- Configure and implement the Cisco MDS switches and platform features, such as initial configuration, building a fabric, building a SAN extension and configuring inter-VSAN routing for that purpose
- Configure FCIP tunnels
- Resolve issues and troubleshoot FC domains, zones and zone merges, switch boot and firmware upgrades
Recommended as preparation for the following exams:
- 300-625 – DCSAN – Implementing Cisco Storage Area Networking
This exam is one of the concentrations for the new Cisco CCNP Data Center Certification, passing the exam will also provide the Cisco Certified Specialist – Data Center SAN Implementation certification.
Attendees should meet the following prerequisites:
- Basic understanding of data storage hardware components and protocols, including Small Computer System Interface(SCSI) and Fibre Channel
- Basic understanding of network protocols, including Ethernet and IP
- Basic routing and switching knowledge
- DCICN and DCICT recommended
Recommended prerequisites:
- CCNA – Implementing and Administering Cisco Solutions
- DCFNDU – Understanding Cisco Data Center Foundations
Engineers involved in the implementation of a storage-networking solution incorporating the Cisco MDS 9000 Series Switch platform.
Describing Cisco MDS Platform
- Cisco MDS 9700/9300/9200/9100 Hardware
- Cisco NX-OS
- Cisco DCNM
- Fibre Channel Architecture
- FCoE Architecture
Describing Key Product Features
- Cisco DCNM 11.x
- RBAC and Authentication, Authorization and Accounting (AAA)
- Virtual SANs
- NPV and NPIV
- Port Channels and VSAN Trunking
- Zoning and Smart Zoning
- Device Aliases
- Inter-VSAN Routing
- Fibre Channel Fabric Security
Describing New Product Features
- 32-Gb Fibre Channel
- Cisco MDS NX-API
- Power-On Auto-Provisioning
- Slow-Drain Analysis
- Analytics and SAN Telemetry Streaming
- Cisco Secure Boot
Deploying Cisco MDS Features
- Installation and Initial Setup
- Building a Fabric: FC Domains and FC Services
- Building SAN Extensions
Troubleshooting Common Cisco MDS Issues
- Fibre Channel Domains
- Zones and Zone Mergers
- Boot and Upgrade Issues
Labs
- Lab 1: Set Up DCNM
- Lab 2: Explore DCNM-SAN Client and DCNM Device Manager
- Lab 3: Configure and Use RBAC
- Lab 4: Configure and Use RBAC with DCNM-SAN Client and Device Manager
- Lab 5: Manage VSANs and Fibre Channel Domain
- Lab 6: Configure NPV and N-Port Identification Virtualization (NPIV)
- Lab 7: Configure Interfaces
- Lab 8: Configure Device Aliases and Zoning
- Lab 9: Explore and Automate with NX-API
- Lab 10: Perform Slow Drain Analysis with Cisco DCNM
- Lab 11: Configure FCIP Tunnels and FCIP High Availability (HA)
- Lab 12: Configure IVR for SAN Extension
- Lab 13: Troubleshoot Zoning and Zone Merges
In de klas, online of beiden.
Klassikaal
Bij de klassikale lesvorm voor trainingen staat een ervaren docent voor de klas. De gecertificeerde, praktijkgerichte trainer begeleidt je door de lesstof, geeft uitleg, laat voorbeelden zien, geeft hands-on opdrachten en behandelt vragen. Alle cursisten leren in hetzelfde tempo en krijgen dezelfde lesstof. De docent bepaalt het tempo afhankelijk van de behoefte van de groep.
Incompany
Wist jij dat alle IT trainingen die we aanbieden op de website ook bij jouw bedrijf uitgevoerd kunnen worden? Zo volg je een maatwerk IT training (Incompany training) met al je collega’s. Jij kunt de training nog specifieker voor jouw bedrijf laten inrichten en het is zelfs mogelijk om een geheel maatwerk traject door ons te laten ontwerpen.
Je bespaart reiskosten en reistijd voor de deelnemers, doordat onze trainer bij jou op locatie komt. Op deze manier kun je meerdere deelnemers van jouw organisatie dezelfde training laten volgen. Dat is efficiënt en effectief! Samen heb je een gemeenschappelijke opleidingsbehoefte en daar gaan we je bij helpen.
We hebben jarenlang ervaring in het geven van maatwerk it trainingen. We kijken zorgvuldig naar de opleidingsbehoefte om volledig aan te sluiten bij je wensen. Zo formuleren we haalbare en concrete doelstellingen en deelnemers kunnen het geleerde in de praktijk toepassen. Op deze manier groeien deelnemers persoonlijk en professioneel op meerdere niveaus.